Paint Can Opener and Powered Driver Stirrer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Paint can opener with hole or magnets for storage. Stirrer with 6.3mm hex for drill or impact driver.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 82
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Paint Can Opener: Provides better angled lift than a screwdriver. Use two for stubborn can. Places on the back side for magnets. Choice of two each 4mm and 6mm, and one 8mm, all 2mm thick. Hangup hole for 6mm. I used PLA at 0.20 layer, 4 walls for strength, 50% infill. A brim or raft may be needed for adhesion.
Paint Can Stirrer: Length is best for quart size cans. Can be driven with a drill or impact driver. It has a locking ring. Some sanding at the end may be needed. It does have a tight fit. No brim or raft needed. I used PLA at 0.20 layer, 5 walls for strength, 50% infill.