Tamiya MF-01X wider arms
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attention!: Models were taken directly from my prototype, in Which I didn't do corrections of dimensions. They will…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 44
- Makes
- 0
- Views
- 457
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Attention!: Models were taken directly from my prototype, in Which I didn't do corrections of dimensions. They will need some post-processing for perfect fit!
For my MF01XL project, I needed longer arms - originaly, I intended to use TL-01 ones, but as I had some 45mm dogbones available I decided for a slightly longer variant - resulting width is still within 190mm.
Rear arms have offset mounting points - together with modified shock tower, this results in perpendicular shock position. Different front shock tower to adress longer front arms, is included, too.
Suspension is designed to work with 60mm CVA mini dampers - but it mighn need some tweaking for maximum travel.
With some modifications, the arms can be used on any tamiya with similar geometry - TL-01, M03,4,5,6, WR-01, GF01, G6-01 and others.
Print Settings
Supports:
Yes
Notes:
All models should be in right position for printing. Supports needed, 3-4 perimeters should be good enough.
Category: R/C Vehicles