Magnet adaptors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glue on extra magnet holders for CoreOne drybox
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This uses 20x6x1.5mm magnets. I couldn't find the 2mm magnets for a reasonable price, but in the UK this 1.5mm size is available in neodymium for a very reasonable price from ebay.
I had a lot of trouble with the drybox, perhaps because I printed it in parts and glued them together, and printed them in ASA. I made these additional magnet holders to try to help keep the door closed, but it wasn't enough and the humidity is still high. However, you may find that they work well for you.
Depending on where you are putting them you'll need either the 45 degree or the 90 degree version.
I've included the Fusion 360 file for the 45 degree version. There's a single extrusion that needs to be deleted to adapt it into the 90 degree version.