Yarn/Wool rotating holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's time for your new knitted sweater!
- Rating
- 5 / 5
- Likes
- 131
- Downloads
- 348
- Makes
- 1
- Views
- 1,652
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a simple yarn unwinder/holder consisting of two parts and bearing. Upper part with “dildo like” impaler and bottom part with slot for bearing.
You will need to buy one 6005 2Z bearing for connecting two parts. Like this one https://www.proprumysl.cz/skf-6005-2z-kulickove-lozisko/
A bigger bearing is increasing the weight of the whole unwinder for better stability.
Printed mine with 3 perimeters, 20% infill for increased weight and silk PLA. The upper part has to be printed with supports under the disc, maybe in the future I'll design something easily printable…
Optionally, if you're skilled enough with a slicer of your choosing, you can slot something in the bottom part of the model via. negative part/pause at layer height combo in your slicer to increase the weight even more.
Enjoy :)
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄ UPDATE ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄
If you'd want to print upper part with almost no supports, I've modified the part onto 2 pieces, stick and disc. Print both of those new parts and just slide stick through a hole of the disc. There should be just enough tolerance between parts, but just in case, let me know and i'll modify the part again, if the tolerance is bad. :)