1 / 3
DJI Robomaster S1/EP Infrared Distance Sensor Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket allows you to add the Infrared Distance Sensor on the left of the robot.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 47
- Makes
- 0
- Views
- 979
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
DJI Robomaster allows you to add the Infrared Distance Sensor on EP but in a terrible position right under the gripper. I tried to tape it with double-sided tape in the front of the hit detector but for better accuracy, the sensor needs to be at a higher position. So this bracket would just do that.
I used the power connector module between the mainboard and the sensor.
You would need:
- 2x M3 6mm from the box B to attach the sensor to the bracket
- for the bracket to the frame you can use 2x M3-H i believe 12mm with Nylok nut. i used my spare nuts from my 3d printer 2x M3 10mm screws with M3 nuts
Print instructions:
- PLA will do.
- No support is required.