1 / 4
Trofast support (container holder) for countersunk screws
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified for use with countersunk screws. An additional variant for the outside with only one central screw hole.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
I was bothered by the fact that the TROFAST drawers easily tip out of the guide when pulled out.
These small stabilizers give the drawer additional support.
The parts are symmetrically designed and can therefore be used on the left or right without mirroring in the slicer.
There are two versions:
- Outer wall version: one central screw hole.
- Inner wall version: two screw holes.
Only one screw is used per part, allowing the screws to be placed alternately on opposite sides without getting in the way inside the cabinet.
For countersunk screws with a head of Ø 6.8 mm × 3 mm deep.
Screw: Ø 3.5 mm (e.g., wood screw)