1 / 4
Mazdaspeed3 parcel shelf replacement peg
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you've broken a parcel shelf peg from the hatch of your Mazdaspeed3, this is the fix.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 11
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a Mazda3 and the parcel shelf in the back has a broken peg, this may be the solution for you. You'll have to remove the trim piece, drill out the existing hole to 10 mm (25/64") then pop this in from behind. It's meant to be a tight fit, so you'll have to push a bit to get it over the lip.
I printed horizontally in ASA to keep the layer lines from being along the axis, but you could print it vertically and just set the number of perimeters high enough so it doesn't use infill.