1 / 7
Ratrig_6WD
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It’s a RatRig Hybrid CoreXY setup with six motors.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Due to the length of the Y-axis tensioner, the Y-axis printable area of the RatRig 500 has been reduced by 80 mm.
Since the Z motors are positioned on top of the plate, the printable height has been reduced by 60 mm.
The belt tensioning component in the tensioner uses the same CNC part as the one used in the original V-Core 4 tensioner.
When using 35mm shaft motors, dampers are not required.
However, if you use the 25mm motors currently in use, dampers are necessary.