Rack Mount for Netgate SG-3100
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple rack mount bracket for the Netgate SG-3100 router/firewall appliance. This model is for the left hand side,…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 62
- Makes
- 0
- Views
- 888
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A simple rack mount bracket for the Netgate SG-3100 router/firewall appliance. This model is for the left hand side, just mirror it in your slicer for the right hand side. Mounts by unscrewing the feet and reattaching them (or not) with the bracket between the body and feet. Does not cover any vent holes. For non-commercial use only, please contact me for commercial use.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: AzureFilm PETG Black
Notes:
I used PETG, with tree supports and support floor/ceilings for easy removal under the feet. You can also print without any support and cutout the feet mount, using double sided tape to secure it if needed. That way you don't have to remove and reattach the feet from the device. Both methods should work fine.
Category: Computer