Capybara Headset and Controller Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€30.53 – €37.31 net (excluding VAT)
For file: capybarastand_0.4n_0.2mm_PLA_COREONE_21h29m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €33.92 excluding VAT (range midpoint).
- Weight reported by the author
- 684 g
- Print time reported by the author
- 21.48 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A model of a Capybara able to hold a controller and for use as a headset stand.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 63
- Makes
- 0
- Views
- 719
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
A model of a Capybara able to hold a controller and for use as a headset stand. I created it in Blender myself.
The model fits a Pruse Core one with the dimensions being the following: X 223 Y 164 Z 270. The size has been modelled to fit any usual headset. The paws can hold most controllers without issue.
If printed at 0.20mm SPEED with 5% infill it takes about 22 hours to print and uses up around 700g of filament. The Gcode for that is down below.