Heat insert nut ironing tips holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Heat insert bits are totally different
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original "Heat Set Insert Tool" I brought for my TS101 has a M5 Thread but didn’t have M2.5 bit and the threads were a bit ropey. They cleaned up with a M5 tap and die.
Brought extra bits from Amazon. https://www.amazon.co.uk/dp/B0DCJ64D94 , and whilst not designed for the TS101 tool it was easy to put a 5mm thread into the long adapter (M4).
All of the new bits are M4. Push fit. Has room for M5 to M4 Adapter. All of the M4 bits are around 12mm high. Push fit, use Soldering iron to pull out the inserts.
This is a totally new design, uses 4mmx2mm magnet as per solder reels.