Articulated Roach
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.35 – €0.43 net (excluding VAT)
For file: roach_kit_card_0.4n_0.3mm_PLA_MINIIS_20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 20.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Articulated roach with snap-together joints.
- Rating
- 4.845 / 5
- Likes
- 2,048
- Downloads
- 10,985
- Makes
- 132
- Views
- 35,854
- Reviews
- 129
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an articulated roach model. It has six legs and a head with joints that snap into the body. It's pretty creepy.
Printing Tips
- Available as a complete kit card or as individual parts.
- Printable at 0.3mm layer height to save time. Layer lines add to the creep factor.
- The joints are thin and need to flex to snap in place. Old or brittle filament might fail. I used Prusament PLA without issues.
- Insert the head and legs at 90° angle into the body, then rotate to desired position.
For a cuter Halloween print, have a look at my previous Ghost Whistle model: https://www.printables.com/model/604285-ghost-whistle