1 / 1
Bracket Scottoiler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Hole diameter 8mm
Bracket 19mm x 19mm x 25mm
Infill: 18% Gyroid
Layer height: 0,25mm
Wall thickness: 1mm
Top/Bottom thickness: 1mm
No supports needed
Recommend material is PETG or PLA+.
I used normal PLA it works also fine.
I clamped it with two zipties ( holes for these are 5mm x 1,5mm ) to fix it to the swingarm
For questions text me :)