PTFE ROLLERCOASTER MOD - PTFE TUBE RISERS FOR QIDI PLUS 4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mod replaces the stock ptfe clips on the 4 cable chain to lessen filament tension.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 88
- Makes
- 0
- Views
- 820
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Due to the low clearance above the Plus 4 tool head a solution was needed to allow a more forgiving filament path for TPU 85A, PPS-CF, etc.
This mod will only work with an additional riser mod. I prefer the mod submitted by stew675. https://www.printables.com/model/1336157-50mm-tall-vented-riser-for-qidi-plus4
You will need to clip the led anchors in the back and right side as the risers will snag on those.
Among the parts, I've included an optional spherical riser that can rotate if you prefer.
I suggest printing the risers using a filament that can withstand 65c chamber heat or higher. Anything ABS or better would be preferred. The use of glass or carbon filled is discouraged due to excessive wear on the tube.
File types included: step, stl, solidworks, jpgs.
Comments, suggestions are welcome & appreciated!
Steve C.
Co-founder, Team 7 Beta Testers