Bicycle Pannier Lower Support (for cantilever brake mount rack)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to use an Ortleib-style pannier with a front rack that mounts to cantilever brake post holes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This will allow you to use an Ortleib-style pannier on a front rack that mounts to cantilever brake posts. Has two parts and needs two m3 bolts and nuts. The size you need depends on your fork tubes. Print with ABS or PETG for strength (other filaments may work but are untested), 4 walls, 25% infill. I've used this on my commute for about 50 miles total and it has worked well, but use at your own risk.
My bike has fork tubes that are 28mm in diameter. I've included STEP files for you to change this to accommodate your bike but you should be able to go a few mm bigger or smaller with this version.