Wall Mount Bracket for Cornhole Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts Cornhole board to a wall
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 52
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
Print 2 of these and mount to a wall to get your cornhole boards up and out of the way.
Uses 2 sheetrock anchors with accompanying screws. This one in particular…https://www.homedepot.com/p/Triple-Grip-8-1-1-4-Gray-Ribbed-Anchors-with-Screws-100-Pack-171K/202527079
Also use 2 #8-32 X .75" Socket Flat head screws that are used to prevent the model from delaminating under the weight of the boards. The print is sized to just below the Major Diameter and the screw cuts into the print. Apply some force to get it started as you turn the screw. This is the screw from McMaster-Carr https://www.mcmaster.com/92210A197/
Use 0.20mm Layer Height. 3 or 4 perimeters and 25% infill.