Universal Tail Prop plus Hooks for Heath S-1-1 Suet Feeder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added a second hook insert to the Tail Prop for more connection options. Adjusted hooks to fit Heath S-1-1 feeder.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original (v2) model worked great for our first suet feeder after making some alternate hooks for the larger size. Our other feeder uses a different design with two thicker wires on the bottom instead of one. Additionally, the hooks were too far apart when completely tightened or not far enough apart while fully loosened.
In addition to the adjusted hooks, I added a new opening for the unthreaded hook that's 10mm closer to the threaded hook. Since the overall size of the Tail Prop has not changed, this part be helpful for other suet feeders aside from the Heath S-1-1 feeder. The Bolt file is identical to the original and has not been remixed (included for convenience)
I used the same print settings as the original model with 25% infill and 5 walls.