BlueSCSI Desktop Mounting Brackets, for all revisions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D data for the BlueSCSI Desktop Series brackets, reinforced and M3x5mm screw compatible.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
We are pleased to release the 3D print data for the BlueSCSI V2 2023.10a Mounting Bracket. This is the stl file we created for a BlueSCSI official seller group about two years ago.
This model was created by Kero's Mac Mods team, Alan Williams under the supervision of Kay Koba.
In the final revision, the side mounting tabs has been reinforced for improved durability.
The center screw hole is designed for an M3 screw, with an ideal length of 5 mm.
- In most cases, use “BlueSCSI_DT_2023-10a_Final” *This is for the current product as of October 6, 2025.
- If you feel that this is a little too large, use “BlueSCSI_DT_2023-10a-Narrow_Final”, which is 0.2mm smaller.
- "BlueSCSI_V2_DT_2022.12a_Final_OldRev" is for the old revision BlueSCSI V2 Desktop 2022.12a that was first released.
- “BlueSCSI_V1.1a_DT_V3.2” is for the V.1.1a, STM32 (Bluepill) version.
This bracket design is used by many official BlueSCSI sellers, making it a widely adopted mounting standard.
Of course, this is included when you purchase BlueSCSI from us. We deliver high-quality BlueSCSI made in Japan to the world!