Duender MGN9 Front Tension Holder for Long Bolts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This project contains a re-design of the front tensioner housings to use M5x45 and M5x25 bolts.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
This project contains a re-design of the front tensioner housings from Sergei Irbis, and they re-use the stock pulley holder inserts.
The main change is that it uses the M5x45 and M5x25 bolts from the Ender 3 (you need to tap your threads into the extrusion at least 20mm) to make for a very strong connection. Note that the spare M5x25 bolts are the perfect length for adjusting the belt tension.
I have also adjusted the geometry to provide a solid end-stop for my newly designed Wheel to MGN9 Adapters.
Finally I played with the aesthetic to get something that I liked better.
Printing
Print in the same orientation as the stock parts, it should import in the correct orientation. No support is required as hole recesses have support built into the model.
Installation
These should pretty much be a swap from the original part, you re-use the existing pulley holders so no rebuilding of the bearing stack.
However you will likely need to tap a longer M5 thread into the end of your extrusions. I have designed for the M5x45 and M5x25 bolts to have 18mm of thread protruding from the mount, so I suggest extending the thread length to 20mm with a tap.
Use some tape on the tap to make the 20mm position. Make sure to use the original thread to guide the tap in, as you don't want it cutting a new thread that is out of alignment.
CAD
The part is designed using FreeCAD. I can't provide STEP files, sorry, as FreeCAD can only import STEP files, it cannot export them as far as I know.