1 / 5
Slider for Busy Board Active Board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This slider is meant to be mounted on a wooden board with lots of other things. It can be used for small children.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 93
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Haptic Models
- License
- Creative Commons — Attribution — Noncommercial
Busy Board /Activity Board Slider
This slider is meant to be mounted on a wooden board with lots of other things.
It can be used for small children.
Print settings:
- Print orientation like the third picture.
- No supports needed
- Layer Height: 0.2 mm
- Nozzle Diameter: 0.4 mm
- Perimeters: 3
- Infill: 10 %
Assembly:
Hardware: 1 x M3x8; 5 x 3 mm wood screw (length from 12 mm on)
Screw the knob to the slider with the track in between before securing the track on wood. The slider kann be held with a 5 mm hex key.