AirVape Legacy Pro 2 Power Button replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The AVLP2 has an issue with the rubber power button getting stuck pushed in. I whipped up a quick replacement.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 126
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
The AVLP2 has an issue with the rubber power button getting stuck pushed in. I whipped up a quick hard plastic alternative. Printed flat and heated to shape it.
Print at 0.08mm layer height for best results on the angled peg. The flat peg version is easier to print but the angled peg fits better.
Make sure you insert the smaller peg into the small hole on the mouthpiece side, then fully press it into shape. The angled peg version will sit completely flat against the curve with no gap visible, you can do it better than I did in the video.
See the process here https://imgur.com/a/KNFTcFv
Here is how you remove the rubber power button cover https://imgur.com/a/u6BAhhD