Nerf Rival Finisher Magazine Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement tube that slides into the magazine for the Finisher. It enables the magazine to be opened, even…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 588
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement tube that slides into the magazine for the Finisher. It enables the magazine to be opened, even with it empty. Simply unscrew the two screws on the top of the mag, and slide out the original tube, then replace with the printed one.
If your rounds are not feeding properly, sanding the notch on the inside of the part should do the trick.
How the part slides: https://youtu.be/zEIpIjwfMU0
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Resolution:
.2
Infill:
Doesn't Matter
Filament: Generic PETG (for layer adhesion)
Category: 3D Printing