1 / 4
Realistic Full-Size Toy Waffle Iron – 5-Heart Design — image 1
1 / 4

Realistic Full-Size Toy Waffle Iron – 5-Heart Design

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A life-size, realistic waffle iron with 5-heart design – includes a matching printable waffle.

Rating
5 / 5
Likes
15
Downloads
47
Makes
1
Views
361
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A life-size, realistic waffle iron – designed just like the real thing!

This 3D model was carefully created based on classic 5-heart waffle irons, including all key details.
The proportions match real appliances – only this one is completely safe, clean, and 3D-printed!

Perfect as a toy for the kids’ play kitchen, a display model, or a fun maker’s showcase piece.
Even a printable waffle is included – and it fits perfectly into the iron!

Printing information

The STL files are correctly aligned.

Layer height: 0.2 mm
Perimeter: 2
Infill: 10 %
Support: no

Tip: Prusament Galaxy Black gives the waffle plates a surprisingly realistic cast-iron appearance.

Assembly instructions


Exploded render of the life-size 3D-printed waffle iron with all key parts labeled.

  1. Assemble the base:
    Place the base housing onto the base plate and secure it with the four printed screws.
    Tighten them carefully until the housing sits flush on the plate.
     
  2. Insert the waffle plates:
    Place the upper waffle plate into the lid housing and the lower waffle plate into the base housing.
    A small amount of super glue will ensure a permanent bond.
    Make sure to align them correctly using the locating notches.
    Check that both plates are properly aligned with each other so the printed waffle will fit perfectly.
     
  3. Insert the lid housing into the base housing, aligning both hinge parts at the back.
    Secure the connection from both sides using the two printed hinge pins.
    A small drop of super glue on each pin will ensure a firm and permanent hold.

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.

Tags