1 / 2
Aeronaut Triple Thermic Hatch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small hatch for the Aeronaut Triple Thermic RC sailplane
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D printed version of the small hatches on the Aeronaut Triple Thermic RC sailplane. The original is a friction fit, and generally needs to be taped on in order not to fall off.
Two variants are included:
- Exact reproduction
- This should be printed flat on the side away from the rails
- Hatch with a thumb latch to engage and keep the hatch from popping off.
- This should be printed on end, latch down, with a brim to avoid falling over. This orientation is required to keep the latch from adhering to the hatch.