RO drain connection with a JG G1/4" fitting.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert for a drain tee in a P-trap for reverse osmosis drain water.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Insert for a drain tee in a P-trap for reverse osmosis drain water.
Proper installation (before the U-bend), no drilling required.
Model height: 8 mm.
Nut size: for an 18 mm open-end wrench.
Gasket skirt diameter: 30 mm.
Gasket skirt thickness: 1.56 mm.
Drain tube connection: John Guest 1/4".
Fitting connection: G1/4" (BSPP).
The fitting can be easily purchased on AliExpress.
Search keywords: John Guest 1/4, filter fitting.
Added a second version of the model. It is slightly taller, which allowed for the implementation of a seating for an O-ring seal.
The seat dimensions are designed so that when the fitting is tightened, the ring first fits freely into the groove and then begins to deform, tightly filling all the available space.
This process is limited by the fitting's own skirt, so you cannot over-tighten and damage the seal.
