Triton-9 3x10 bar JIgs and UNW buttstock pad add on set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
additional tools and instructions
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
this set is to be combined with
https://www.printables.com/model/1421093-triton-6-gbb-collapsible-stock
this makes it so you can use a basic aluminium bar or steel bar (mild steel or low carbon)
to make your own butt stock legs with the help of the jigs
the aluminum option is more then strong enough for airsoft use, and is east to get on places like ali express.
the original Triton-9 butt stock and brace can be used. I just added a bit more material the part that contacts the metal bar
also I added a extra release button option to you can choose what you like more.
parts needed
stock legs
2x 3mm, 10mm, 250mm steel or aluminum flat bar.
locking bar
1x 3mm, 10mm, 59mm steel or aluminum flat bar.
button spring spec
8mm OD, 10mm long, 1.8mm wire
button lockin pin
a M2 bolt that is 12mm long can be used as well.
other specs stay the same from original
------------
the reference parts are just to show you how it should look like. printing it and using is will only work as display piece there is just to much flex in it to really use it.
-
how to make it.
tape the 2 flat bars together after you made the markings on the top flat bar. that can be found in the image. this way you can see if you don't tape at places where it intervene with the placement of the Jig. that haves a line so you know where to drill the flat bar.
for the stock mount holes, that jig can be placed by sliding it on for so far it can.
then the straight cuts can be done with a cutting wheel or filling it
-
the butt pad is made to be glued or JB-welded on the main part the 2 plugs are to help with alignment and reinforcement of the part.
for better instructions. I might add this to the how to make PDF of the Triton-6 once it's released