Silverware Divider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The main challenge for this project was designing a multi-part system with tight enough tolerances for the pieces to slot together semi-securely without glue. I also optimized the parts to be material-efficient, reducing print time and cost.
This is a bunch of parts. They slot together. Easy.
I print the vertical pieces vertically but upside down, feel free to do otherwise. Use a big attached brim, adhesion is a decently big problem here. I can print it all in 4 prints with my 256x256mm bed. You probably should glue the pieces together but you don't technically have to, I haven't and I can still pick it up and move it around if I'm gentle.
If you like what I design, please like and review the model plus follow me and check out what else I've made. The more love I get, the more I will design. I also accept tips via Venmo @skedran