Paint mixer. Míchátko na barvy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mixing paint in cans up to 1.5l. Míchání barvy v plechovkách do 1,5l.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 68
- Makes
- 1
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
It is used to clamp into a drill. The flat stirrer is 18cm long and fits into larger cans. It is printed "lying down" and the printing is very fast (approx. 20min). I print the propeller "upright" and because of the printing time (approx. 1 hour) it is only 16cm long. I use a 20% infill, 3 perimeters, layer height 0.2mm. PLA material which is very resistant to solvents. Both have a strong 6-sided shank for strength.
Slouží k upnutí do vrtačky. Ploché míchátko má délku 18cm a hodí se do větších plechovek. Tiskne se "vleže" a tisk je velmi rychlý (cca 20min). Vrtulku tisknu "na stojato" a kvůli času tisku (cca 1hod) proto má délku jen 16cm. Používám výplň 20%, 3 perimetry, výšku vrstvy 0,2mm. Materiál PLA který je velmi odolný vůči rozpouštědlům. Oba mají silnou 6ti hranou stopku kvůli pevnosti.