1 / 3
Ortlieb C-Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
C-Clip for a Ortlieb Back-Roller Bike Bag
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 2
- Views
- 74
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I lost one of the C-Clips of my Ortlieb Back-Roller.
The manufacturer of the clip is Duraflex.
I modeled the replacement to match the origninal as close as possible and chamfered it to improve haptics and printability.
I printed the clip in PLA which is a little stiffer than the original. As the clip would only keep the strap in place and would not carry any weight, I could not find any disadvantages compared to the original part so far.
Print settings
- PLA
- 5 wall loops on a 0.4 mm nozzle (in order to create 100 % infill)
- weight: 0.95 g