AquaSonic Toothbrush Head Travel Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A box I made using some directions from Youtube. Added spots for 3x3mm cylindrical magnets and ventilation slots.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 55
- Makes
- 0
- Views
- 624
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
My electric toothbrush (an Aquasonic something from Amazon) came with a case but it takes up most of the room in my toiletries bag as it holds the handle plus two heads and isn't very space-efficient about it. I desiged this box with slots for ventilation plus holes for 3x3 cylindrical magnets.
The file is modified a bit in Prusaslicer with slightly enlarged magnet holes as my tolerances were a little off on the first print and it was quite cumbersome to fit them. I also filled in a pair of the magnet holes as I didn't have enough 3x3 magnets for my second print and one pair is plenty to keep this thing shut. Finally, I shaved off two layers close to the hinge as the first print didn't quite want to close flush and added fuzzy skin to the outsides minus the hinges.