Plavák do bazéna na tabletky / Swimming pool tablet float
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plavák an tabletky do bazéna na udržiavanie hladiny chlóru v bazéne. / Swimming pool tablet float
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Plavák an tabletky do bazéna na udržiavanie hladiny chlóru v bazéne. Vkladám iba tabletky do krajných pozícií. Je možné si vytlačiť súbor "Klin" najprv skrátený napríklad na 2 cm aby ste zistili či vám prejde medzi "vrch" a "spodok". V prípade problému o trochu zmenšite rozmer aby ste "klin" zúžili. Ja som si ho vytlačil z PLA a mám ho v bazéne uz 7 rokov bez zmeny. Samozrejme môžete použiť aj silnejšie materiály.Plavák an tabletky do bazéna na udržiavanie hladiny chlóru v bazéne. Vkladám iba tabletky do krajných pozícií. Je možné si vytlačiť súbor "Klin" najprv skrátený napríklad na 2 cm aby ste zistili či vám prejde medzi "vrch" a "spodok". V prípade problému o trochu zmenšite rozmer aby ste "klin" zúžili. Ja som si ho vytlačil z PLA a mám ho v bazéne uz 7 rokov bez zmeny. Samozrejme môžete použiť aj silnejšie materiály.
3 perimetre a 5-10% infill.
-----------------------------------------------
A float and tablets for the pool to maintain the chlorine level in the pool. I only put the tablets in the extreme positions. It is possible to print the "Wedge" file first shortened to, for example, 2 cm to see if it will fit between the "top" and "bottom". In case of a problem, reduce the size a little to narrow the "wedge". I printed it from PLA and I have had it in the pool for 7 years without change. Of course, you can also use thicker materials.A float and tablets for the pool to maintain the chlorine level in the pool. I only put the tablets in the extreme positions. It is possible to print the "Wedge" file first shortened to, for example, 2 cm to see if it will fit between the "top" and "bottom". In case of a problem, reduce the size a little to narrow the "wedge". I printed it from PLA and I have had it in the pool for 7 years without change. Of course, you can also use thicker materials.
3 Perimeters and 5-10% infill