1 / 4
Hager Voltus VZ255N lock pin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a printable design of the original lock pin of Hager voltus series power boxes.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 1
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
On my VU48NC the locking pin was broken. A replacement costs like 6 € and with transportation around 13€. So i just made this model from the non-broken one to print a replacement yourself.
Print Settings (recommend):
Material: PETG / ASA / ABS / PC…
Nozzle: 0.4 / 0.2mm
Layer height: 0.16mm
Infill: 100%
Supports: yes (tree, organic, 35° threshold angle, expansion 0, on build plate only)
→ use support blocker (see image with translucent red cylinder)
Your sliced model should look like my picture (orange and green support-structure).