1 / 19
Self-Similar Truncated Octahedron Fractal | Level 3 — image 1
1 / 19

Self-Similar Truncated Octahedron Fractal | Level 3

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A CAD-modeled Level 3 self-similar fractal derived from the geometry of a regular truncated octahedron.

Rating
0 / 5
Likes
6
Downloads
27
Makes
0
Views
156
Reviews
0

Updated at source:

Model information

Category
Math
License
Creative Commons — Attribution — Noncommercial — Share Alike




This is Level 3 of a self-similar fractal modeled in CAD, derived from the geometry of a regular truncated octahedron. 

Printing half of the model turned out pretty awesome. Toward the end of the print, one of the tree supports came loose and I had to jam it back down into the hole where it was supposed to be. In the end, it actually worked out fine. There are a lot of supports, but they come off easily and the surface underneath looks decent.

I’ve heard of people using different techniques like alternate support materials or custom settings, but I didn’t do any of that here. I just used Bambu Studio’s automatic organic tree supports and printed it in tri-color silk PLA.

I included the 3MF for the version shown in the photos. If you want the full form, you’ll need to print it twice and carefully glue the two halves together (not pictured). It isn’t necessary to print both halves though, just one looks great on its own and can easily hang from a nail since it has a large hole in the center.

I decided to leave some of the supports on because I think it looks awesome, but with some patience and a good pick, you should be able to remove most of them. Some supports may be impossible to remove completely, but using water soluble support material could be a good solution for that.




Print Settings:

Nozzle: 0.4 mm
Layer Height: 0.16 mm with 0.2 mm base layer
Infill: 10%, Gyroid
Supports: Organic Tree, Automatic.



Supports on this model require some patience to remove. I recommend using a tool like a pick or needle to help. As always, use caution when removing supports!

Don't forget to check out other levels in the series! Here's the link to level 2: https://www.printables.com/model/1437052-self-similar-truncated-octahedron-fractal-level-2


License Information:

This model is licensed under Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA). You may share, copy, and redistribute the file for non-commercial purposes with proper attribution. Modifications must remain under the same license. Selling this model or modified versions, either digitally or as physical prints, is strictly prohibited.

*Selling physical prints of my designs is only permitted if you are an active member of my Authorized Seller tier on Patreon, Printables, or MakerWorld.* To learn more, visit https://www.patreon.com/c/endlessdesignlab

Thank you for downloading and supporting Endless Design Lab! 🌀

Endless Design Lab has many more mind-melting models to be unveiled!

Please show your support by following me on all platforms. 
https://linktr.ee/EndlessDesignLab

Social Media:
Instagram | YouTube | X/Twitter | Threads | TikTok | Facebook

Prints, 3D Model Pages, & Memberships:
Etsy | MakerWorld | Printables | Cults3D | Thangs | Patreon | Printables Club

🤝 Want to collaborate?
📧 Email me at [email protected]

Tags