1 / 4
Screen Printing Squeegee Rest
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for a 12mm rod for the squeegee. Prints in place with a clamping mechanism for a 30x30mm frame profile.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I noticed a problem with the bracktes that click onto the frame. There wasn enough clearence at the sides of the frame between the frame and the table of the machine. This was a problem when I wanted to print without off-contact. So I designed a clamping mechanism to attach the bracket to the frame.
The 12mm rod snaps into the hole and is held firmly.