ATS Automatic Thread System [Outdated - Unsupported]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is for wrapping your yarn balls but can also be used for anything else.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 5
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Features:
• 4 spools for yarn balls
• 1 front piece for sorting the yarn
• 3 hole on top for needles
• 1 big hole for all other tools
• Prints support free
Print settings:
Layer Height: 0.2mm
Supports: none
Infill: 3%
Instructions:
Print 1 Main Body, 1 Front, and 4 Spool.
Assembly:
1: Screw in the Front piece until it feels tight.
2: Screw in each Spool until they feel tight.
3: Place the yarn balls onto each Spool making sure that they unravel facing the Front.
4: thread the yarn through the Front carefully.
Notes:
the spools do not spin!
If you use thread or anything else wrap that around the Spool making sure that it unravels facing the Front.
For Portability unravel each spool, then unscrew each part.
The design is inspired by Bamu Labs AMS Lite.
I used sewing thread because I didn't have any yarn on hand.
Happy knitting! ;)