1 / 1
NX Joycon Jig - Bigger Holes/Thinner Guides
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made the holes slightly bigger to fit 20-18 gauge wire (not sure my exact wire size but its approx .6mm). Also made…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 47
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Made the holes slightly bigger to fit 20-18 gauge wire (not sure my exact wire size but its approx .6mm). Also made the guides thinner for less resistance while sliding down the joycon track. I had to slowly feed the wire with pliers.
I printed at 1.5 layer height. Slow speed (took 5 min).
Solid wire only obviously.
Category: Hobby