Buckets for Goose Belt Purger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Must have accessory for your Goose Belt purger - keep you printer nice and tidy with waste buckets
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 90
- Makes
- 0
- Views
- 495
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Purge buckets for your Goose Belt Purger
Included are buckets for the Voron Trident (250, 300, 350) and the Voron 2.4 (250, 300, 350).
Trident buckets are clippable to the frame. Print two clamps and fix them to the rear profile with M3x10 screws and T nuts.
V2.4 buckets come in three variants:
The rear access buckets are derived from the trident buckets and clip to the frame, but you need to lift your gantry in order to remove it.
The front access buckets are specifically designed to slide under under the bed all the way to the front, wher you can pull them out. They are not fixed to your frame. If you need to fix them, you can consider using a self-adhesive velcro or other means.
The center bucket is supposed to be in between the bed profiles and is supposed to catch any debris falling from a brush.
V2.4 Center and Front access buckets were designed by AmfKuna