1 / 3
Simple Boxes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple boxes, I use them to keep electronic components organized
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
The height is 64mm, so they should fit into most spool boxes.
The vertical walls are 0.86 mm, the thickness recommended by Prusa Slicer for 2 perimeters and a layer height of 0.20 mm.
The horizontal walls are 1.00 mm, so.. for them I used 5 layers at 0.20mm
So consider printing it with these settings
0.20mm
2 perimeters only
5 horizontal walls
The cap is quite stuck, but after opening and closing it a couple of times, it works fine.