1 / 1
Clips for 2-10 PTFE tubes (4mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original MMU3 PTFE tube clips, but for 2 to 10 tubes (4mm diameter).
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 100
- Makes
- 2
- Views
- 229
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
The original MMU3 PTFE tube clips, but for 2 to 10 tubes (4mm diameter).
Print settings
No supports, 100% infill.
I recommend PETG (or ASA) if the clips are used within the enclosure of your 3D printer. PLA should be fine outside but might be a bit stiff.
Any layer height should do. I used 0.25mm for speed.
Use the 3MF model for preconfigured print settings.