Cute Mummy Figurine/Keychain
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.33 – €1.62 net (excluding VAT)
For file: cute_mummy_keychain_0.4n_0.1mm_PLA_MK4IS_1h50m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.47 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.83 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cute Mummy Figurine/Keychain
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 153
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Design Concept
The Cute Mummy Figurine is designed to imbue a sense of playfulness and charm, incorporating a friendly aesthetic into the traditionally eerie character design while remaining easily portable as a keychain.
Purpose
This figurine serves both as a decorative collectible and a functional keychain accessory, enhancing personal belongings with a unique flair. It's an excellent gift or a collectible item for enthusiasts of small, character-inspired designs.
Printing Suggestions
When printing this model, use a layer height of 0.1-0.2 mm for smooth surface details. A slow to medium printing speed is advised to preserve the intricate folds and features of the mummy's wrappings.
Assembly Instructions
This model is a single piece, covered in intricate detailing, thus zero assembly is required. Ensure to carefully remove any support structures post-print to avoid damaging fine details.
I printed in PLA
- Figurine
- Infill: 15%
- Layer Height: 0.20mm
- Brim: Yes
- Supports: Yes, organic on build plate only
- Seams: Back/Rear
Keychain
- Infill: 15%
- Layer Height: 0.10mm
- Brim: Yes
- Supports: Yes, organic on build plate only
- Seams: Back/Rear
If you like my work consider