1 / 3
Dygma Raise 2 Tenting Kit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tilt your Dygma Raise 2 keyboard by 15 degrees.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
Tilts your Dygma Raise 2 keyboard by 15 degrees.
You need eight M3 screws to attach it to the bottom of your keyboard. The screws should be 4 to 8mm long. If you only get 10mm (like me), you need the spacer (see picture).
To prevent the kit from sliding on your desk, stick some foam rubber under the stands.
I printed it from PLA, 0.15mm layer height, 0.4 nozzle.