1 / 5
Cast iron skillet / frying pan - Rapunzel — image 1
1 / 5

Cast iron skillet / frying pan - Rapunzel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

It's mostly just a skillet.

Rating
5 / 5
Likes
11
Downloads
74
Makes
0
Views
360
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

It's a basic model for a cast iron skillet, with the option to swap the bottom plate out to customize it in any way you need to.

Attached is a phone mount plate for an iPhone 16 max pro just in case you need it.

The plate should just barely fit on a 256x256 plate, but it can be scaled down easily in the slicer.

Preparation

How to get the cast-iron effect:

use Paint-on fuzzy skin - available in the latest versions of Bambu slicer, Orca slicer, and Prusa.

Paint the following areas using the FILL bucket:

The inside of the skillet ring ONLY on the top part, not the bottom areas (as pictured below)

The top of the lip

and the outside, but NOT the interior of the handle connection (as pictured below)

You just want to avoid any areas that connect in order to preserve the fitting clearance. Everything else can be fill-bucketed to your preference.

 

Print the flat part of the main body on a textured PEI plate face-down to give it an easy textured surface, no fuzzy top surface needed. This is pre-oriented in the stl files.

 

Print settings

 

Please use supports on the handle and connection point on the skillet ring.

If you use the iPhone attachment plate, it should not need any supports but I do not have the phone so I cannot guarantee that it works properly. If it doesn't, just message me for a fix up.

 

Settings I used to achieve my effect:

Fuzzy skin (painted on)Fuzzy skin (painted on)

type: Perlin (other types will work too)

point distance: 0.3

point thickness: 0.2

 

If your slicer doesn't have Perlin just use classic or another type. You can play around with it and check the preview to see approximately how it will look depending on your fuzzy skin.

 

Assembly

 

Print one of each item (either iPhone plate or basic plate)

The handle should slot into the handle hole after removing the supports, and attach with the printed cylindrical bolt piece included.

The base plate is designed to “click” into place, but I highly recommend using super glue to set it anyway to prevent it from falling out, especially if you plan on putting anything heavy on it.

 

Tags