Crossed Bones Link
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.42 – €4.18 net (excluding VAT)
For file: Plate_of_Bones_0.4n_0.2mm_PLA_COREONE_2h57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.80 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 2.96 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Crossed bones that link together with ball and socket joint. The intent is for a Halloween accessory or decoration.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 19
- Makes
- 0
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution
The model is crossed bones that link together. My initial thought was for my dogs to wear on Halloween, but it could be used as general decoration as well.
Whatever you decide to use it for keep safety in mind. They are not edible and I don't suggest letting your pet chew on it.
I only tested using PLA on a Prusa Core One on the following settings: .20mm height (Balanced mode on Prusa Slicer), .4mm nozzle, 15% infill, and all default settings. I did not use any supports, rafts, skirts, or brims.
The model is 30mm from center of ball to center of socket (roughly 1.25 inches). As an example, my dog weighs 50lbs (~23kgs) and 20 links was plenty to fit around his neck.