1 / 4
Arduino Nano 33 IoT Bootloader Adapter Holder SWD Programming Clip No-Solder Debug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 3D-printed adapter holder allows easy access to the underside SWD pads of the Arduino Nano 33 IoT — completely…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
This 3D-printed adapter holder allows easy access to the underside SWD pads of the Arduino Nano 33 IoT — completely without soldering. It’s designed to hold standard Dupont jumper cables or spring contacts securely in place, enabling reliable flashing and debugging via SWD (e.g. with an ST-LINK or Nucleo board).
The holder precisely aligns with the five underside pads — RESETN, SWCLK, SWDIO, GND, and 3.3 V — and keeps them firmly connected throughout programming.
Category: Other