Round Rack Canoe Carrier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eight years ago, I posted by first design https://www.thingiverse.com/thing:27043 which was a rack stop for a square…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Eight years ago, I posted by first design https://www.thingiverse.com/thing:27043 which was a rack stop for a square tube. At that time, I was using sketchup and ABS. I remember it was quite the hassle to design and get the first layer to stick and then to keep the ABS warm enough to avoid warping.
Last weekend, I helped a friend load his canoe while parked at a slope. It was a hassle as the canoe kept sliding sideways off the rack. A quick trip to F360 and an overnight print solved this problem.
I printed in PETG at 40% infill for strength. ABS or nylon would also be good.
I used some bolts I had lying around. I heated up the bolts and pulled/melted them into the holes. Stainless steel will be best for this outdoor application.
Print Settings
Printer:
JJT Makerslide
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
40
Category: Sport & Outdoors