Wen Rotary Tool Mount 2417 CNC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount to attach the flex shaft of a Wen rotary tool to a CNC 2417 machine. This gives quite a large power increase…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A mount to attach the flex shaft of a Wen rotary tool to a CNC 2417 machine. This gives quite a large power increase without adding more weight to the machine's Z axis.
You need four 4mm screws and nuts or similar (holes are sized at 4.5mm). The fit of the two halves on the stylus will be TIGHT push hard to get it in place (if the stylus has a raised arrow icon for the rotation direction this might be a problem trim off the icon with a knife)
NOTE: This spindle setup is not going to be stiff enough for aluminium but routes wood easily.
Category: Machine Tools