1 / 2
Temp Tower | Temperature Test | Stringing and Bridging Probe (8 Levels) FIXED
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Features:
- Uses little material because it is not too big
- Different overhangs, 45° and a curved one
- A thin wall at the overhang to test the layer adhesion by breaking it
- A bridge, from 30mm length in the back to 35mm in the front
- Several filigree datails
- No temperature labeling, as this varies according to the material anyway
- A large base for good bed adhesion
The individual segments are 10mm high, therefore every 10mm the temperature change can be set with the M104 S… command.