Tungsten Grinder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple 3 piece adapter for Dremel tool. Works with my Dremel 10.8 and my 3220. I printed them solid but only the…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 82
- Makes
- 0
- Views
- 1,544
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Simple 3 piece adapter for Dremel tool. Works with my Dremel 10.8 and my 3220. I printed them solid but only the backup wheel probably needs to be. The backup wheel needs to be a good print or you may find it vibrates or is out of alignment. The wheel is attached with a 3x30mm bolt and 2 washers and a lock nut. The first print of the basenut I had a 2mm reset in the drawing and found the threads didn't print well 2mm off the table. I printed the second with full threads and just trimmed the hole a little so it threaded on all the way.
It uses a 35mm diamond grinding wheel which is available for less than $10 on ebay.
It has 22.5 degree guides for 3/32 and 1/16 and too open slots for breaking off a little or just doing any angle you choose.
Use safety glasses, and of course use at you own discretion.
Category: Machine Tools