Quick Shelf, No Support, 180mm*100mm & 250mm*100mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a shelf, doesn't use much time or material, prints with no supports.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 19
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello!
I have designed this shelf unit to print with no supports, with the goal of using minimal time and material, while still being sturdy enough to hold my ever growing collection of 3d prints and “stuff.”
The 180mm * 100mm is large enough for 3x funko pop sized items, while the 250mm * 100mm version would fit 4.
The brackets and shelf print on the same plate, quickly and easily sliding together for a snug assembly. Fuzzy skin has been applied to mating surfaces for a snug, but not too snug fit. Tested in both PLA and PETG.
If you find the fit to be too tight, you can try to remove the fuzzy skin, if it's still too tight, try to adjust XY contour compensation by 0.05.
If it's too loose, remove the fuzzy skin and adjust XY contour compensation by -0.05. I'm always happy to help if you run into any issues.
Each bracket contains 2x holes at 4mm diameter for screw mounting, for my case I have used double sided adhesive tape, 4 pcs for each shelf at about ¼" * 1".
Bambu A1 time and material using provided 3MF's:
180mm*100mm shelf and brackets = 1h28m; 50g
250mm*100mm shelf and brackets = 1h49m; 63g
- 0.18 layer heights, 0.40mm line widths, 3 top layers, 3 bottom layers.
- Brackets = 3 walls, 5% crosshatch infill.
- Shelf = 2 walls, 10% crosshatch infill.
Comments, questions, suggestions, remixes all welcome, thanks for your time, happy printing!