1 / 7
Battery adapter for Womax S20V for Ingco cordless Vacuum cleaner P20s — image 1
1 / 7

Battery adapter for Womax S20V for Ingco cordless Vacuum cleaner P20s

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Battery adapter for Ingco vacuum cleaner bonus accessories holders.

Rating
0 / 5
Likes
1
Downloads
9
Makes
0
Views
98
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

Older battery adapter can be removed and some part might be needed to be cut off to make a room for new one , just screw it in.

There are bonus side mounted addons for hose and cleaning pipes , i recommend print it in ABS because of flexibility . There are two types short and long depending on it position on rim of vacuum cleaner .

The size of battery metal contacts is 15 x 13 mm , thickens 0.8 mm 

A dry wall metal supports are good alternative for metal sheet , for contacts.

A wood screw betwine  20 - 30 mm depends on tool handle size on the other side , for securing to tool.

Solder metal contact outside of plastic adapter and then insert in print . A 60 Watts or higher soldering iron is a good idea.

Some tools need a third pin that detect battery temperature , a work around is to use 10 000 ohms ( 10K ) ¼ Watts , connect betwine signal wire third one ( middle connection ) and battery minus usually, some use plus connection , so try with which one works . it is a 10 000 ohms resistor very very little chances of shorting something.

Once inserted a 3d printer pencil or a glue gun are good for securing connections.

Tags